Merchandise Description
High Quality Geka Fast Connect Hose Couplings for Backyard garden Watering/Hose/Air
Geka couplings , also names as Geka steam hose coupling, Sometimes called a “swift swift launch coupling” or “claw coupling”. Usually connected by pushing and rotating the 2 couplings together. The distance among the claws becoming forty mm. Common material is brass and with NBR seal. GEKA couplings are symmetric quick couplings created for agricultural, gardening, construction and general public service apps. ZTN have substantial quality brass geka with hose tail quick coupling and brass geka with female or male BSP qucik coupling.
|
GEKA Hose Coupling |
Materials |
Dimension |
|
Hose Finish |
Brass |
3/8″, 1/2″ |
|
five/8″, 3/4″, 1″ |
||
|
one/1/4″, 1-1/2″ |
||
|
Female Thread Hose End |
Brass |
three/8″, 1/2″ |
|
five/8″, 3/4″, 1″ |
||
|
one/1/4″, 1-1/2″ |
||
|
Male Thread Hose Finish |
Brass |
three/8″, 1/2″ |
|
5/8″, 3/4″, 1″ |
||
|
one/1/4″, 1-1/2″ |
Geka Quick Irrigation Couplings Positive aspects
one. Straightforward set up, no need for expensive installation instruments, can be disassembled and employed at any time
2. The relationship among the hose and the joint is definitely appropriate and organization. Offer security to avoid dust from accumulating among the hose main and the outer end of the hose. No lifeless finishes are shaped, and the greatest protection and cleanliness standards are reached
3. Will not injury the overall flexibility of the hose. When bending, the hose is externally supported on the sleeve of the hose connector
four. Higher force loading. Working pressure (form sealing ring)> forty bar. The functioning stress of hose joints is dependent largely on the hose.
5. Vacuum resistance of water column up to ten m (form sealing ring) The vacuum resistance of hose joints mainly depends on the hose
six. For nearly all large-quality h2o, industrial and pressure hoses from properly-recognized manufacturers (you should be aware the hose wall thickness)
7. Vacuum resistance of h2o column up to 10 m (shaped sealing ring)
FAQ
1. Can I have a sample purchase for valve?
A: Sure, we welcome sample get to examination and check out quality. Combined samples are satisfactory.
2. Do you have any MOQ limit for valve buy?
A: Low MOQ, 1pc for sample checking is obtainable.
three. How do you ship the goods and how prolonged does it get to arrive?
A: We usually ship by sea. It usually requires 30 days to get there. Airline shipping and delivery also optional.
four. How to proceed an purchase for valve?
A: First of all enable us know your specifications or software. Secondly We estimate according to your requirements or our tips. Thirdly customer confirms the samples and places deposit for formal purchase. Fourthly We set up the production.
five. Do you supply ensure for the goods?
A: Sure, we offer ten many years guarantee to our items.
|
US $0.5-2.6 / Piece | |
1,000 Pieces (Min. Order) |
###
| Standard: | En1717 |
|---|---|
| Material: | Brass |
| Connection: | Flexible |
| Surface Treatment: | Brass, Nickel-Plated, Chrome-Plated |
| Head Type: | Round |
| Raw Material: | Brass |
###
| Samples: |
US$ 0/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
|
GEKA Hose Coupling
|
Material
|
Size
|
|
Hose End
|
Brass
|
3/8", 1/2"
|
|
5/8", 3/4", 1"
|
||
|
1/1/4", 1-1/2"
|
||
|
Female Thread Hose End
|
Brass
|
3/8", 1/2"
|
|
5/8", 3/4", 1"
|
||
|
1/1/4", 1-1/2"
|
||
|
Male Thread Hose End
|
Brass
|
3/8", 1/2"
|
|
5/8", 3/4", 1"
|
||
|
1/1/4", 1-1/2"
|
|
US $0.5-2.6 / Piece | |
1,000 Pieces (Min. Order) |
###
| Standard: | En1717 |
|---|---|
| Material: | Brass |
| Connection: | Flexible |
| Surface Treatment: | Brass, Nickel-Plated, Chrome-Plated |
| Head Type: | Round |
| Raw Material: | Brass |
###
| Samples: |
US$ 0/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
|
GEKA Hose Coupling
|
Material
|
Size
|
|
Hose End
|
Brass
|
3/8", 1/2"
|
|
5/8", 3/4", 1"
|
||
|
1/1/4", 1-1/2"
|
||
|
Female Thread Hose End
|
Brass
|
3/8", 1/2"
|
|
5/8", 3/4", 1"
|
||
|
1/1/4", 1-1/2"
|
||
|
Male Thread Hose End
|
Brass
|
3/8", 1/2"
|
|
5/8", 3/4", 1"
|
||
|
1/1/4", 1-1/2"
|
Programming With Couplings
A coupling is a mechanical device that connects two shafts together and transmits power. Its purpose is to join rotating equipment and allows some degree of end-movement or misalignment. There are many different types of couplings. It’s important to choose the right one for your application.
Mechanical connection between two shafts
There are many ways to achieve mechanical connection between two shafts, including the use of a coupling. One common type is the beam coupling, which is also known as a helical coupling. It is used for transmission of torque between two shafts. This type of connection accommodates axial, parallel and angular misalignments.
The hubs and shafts of a worm gear are connected together by a coupling. This mechanical connection allows one shaft to turn another without causing a mechanical failure. This type of coupling is made from sliding or rubbing parts to transfer torque. However, the coupling is not designed to withstand jerks, so it isn’t suitable for high-speed applications.
The use of a coupling is common in machinery and equipment. It helps transmit power from one drive shaft to the other, while adding mechanical flexibility. It is also useful for reducing the impact and vibration caused by misalignment. It also protects the drive shaft components from wear and tear.
A double-hook coupling can be used to provide a uniform angular velocity at the driven shaft. Another example is a double-jointed coupling. A double-jointed coupling can be used to connect shafts that are not directly intersecting. The double-jointed yoke can be used for the same purpose.
A shaft coupling is a device that maintains a strong mechanical connection between two shafts. It transfers motion from one shaft to another, at all loads and misalignments. Unlike a conventional linkage, a shaft coupling isn’t designed to allow relative motion between the two shafts. Couplings often serve several purposes in a machine, but their primary use is torque and power transmission.
Functions that control the flow of another function
One of the simplest programming constructs is a function that controls the flow of another function. A function can take an argument and return a different value, but it must be ready to return before it can pass that value to another function. To do this, you can use the goto statement and the if statement. Another way to control flow is to use a conditional statement.
Criteria for selecting a coupling
There are several important factors to consider when choosing the right coupling. One of the most important factors is coupling stiffness, which depends on the material used and the shape. The stiffness of a coupling determines its ability to resist elastic deformation. A stiff coupling is desirable for certain types of applications, but it’s undesirable for others. Stiffness can reduce the performance of a system if there’s too much inertia. To avoid this, ensure that the coupling you choose is within the recommended limits.
The size of a coupling is also important. Different coupling types can accommodate different shaft sizes and shapes. Some couplings have special features, such as braking and shear pin protection. When choosing a coupling, you should also consider the type of driven equipment. If you need to connect a high-torque motor, for example, you’ll want to choose a gear coupling. Likewise, a high-speed machine may require a disc coupling.
Another factor to consider when selecting a coupling is the torque rating. Despite its importance, it’s often underestimated. The torque rating is defined as the torque of the coupling divided by its OD. In some cases, torque may fluctuate during a cycle, requiring a coupling with a higher torque rating.
Torsionally flexible couplings are also important to consider. Their design should be able to withstand the torque required during operation, as well as the required speed. The coupling should also have a high degree of torsional stiffness, as well as damping. Furthermore, a damping coupling can reduce the energy wasted through vibration.
The sizing of a coupling is also determined by the torque. Many engineers use torque to select the correct coupling size, but they also take into consideration torsional flexibility and torsional stiffness. For example, a shaft may be able to handle large torque without damaging the coupling, while a disk may be unable to handle large amounts of torque.
Besides torque, another important consideration in coupling selection is the cost. While a coupling may be cheaper, it may be less reliable or easier to maintain. Couplings that are difficult to service may not last as long. They may also require frequent maintenance. If that’s the case, consider purchasing a coupling with a low service factor.
There are many different types of couplings. Some require additional lubrication throughout their lifetime, while others are 100% lubrication-free. An example of a 100% lubrication-free coupling is the RBI flexible coupling from CZPT. This type of coupling can significantly reduce your total cost of ownership.
In addition to the above-mentioned benefits, elastomeric couplings are low-cost and need little maintenance. While they are often cheaper than metallic couplings, they also have excellent shock absorption and vibration dampening properties. However, they are susceptible to high temperatures. Also, they are difficult to balance as an assembly, and have limited overload torque capacity.
editor by czh 2023-01-21
PTO shaft connectors on tractors are not standardized which can guide to complications when connecting the PTO shaft. For illustration, some older tractor models have the relationship flange closer to the tractor by itself generating it challenging to hook up and direct to a prospective protection hazard.
