We – EPG Group the biggest gearbox & motors , couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13 571 88828 13858117778 571 88828
Planetary Ball Mill Manufacturer Geared Motor
1. Product number code
34 H 2 120 – 60– 4A – 001
1 2 3 4 5 67 8
1.Motor size
|
Size |
8 |
11 |
14 |
17 |
23 |
34 |
42 |
|
Flange dimension(mm) |
20 |
28 |
35 |
42 |
57 |
87 |
110 |
2. Type of motor: H means hybrid stepper motor
3. The number of phases and basic step angle: 2 means 2 phases 1.8°;3 means 3 phases 1.2°;4 means 4 phases 0.9°;5 means 5 phases 0.7°
4. Motor length (mm)
5. Rated current: The number is motor rated current×10
6. Number of lead wires
7. Shaft configuration: A-single front B-double
8. Customer series numbers
2.Stepper motor holding torque range
3. Product overview
|
phase\size |
8 |
11 |
14 |
17 |
23 |
34 |
42 |
|
2 phase 0.9° |
|
|
|
|
|
|
|
|
2 phase 1.8° |
|
|
|
|
|
|
|
|
3 phase |
|
|
|
|
|
|
|
|
5 phase |
|
|
Note:
A. 2 phases motor’s basic step angle is 1.8°
B. 3 phases motor’s basic step angle is 1.2°
C. 5 phases motor’s basic step angle is 0.72°
4. General Figures
|
Insulation class |
Class B 130 °C |
|
|
Insulation resistance |
100MΩminimum under normal temperature and humidity, when measured by a 500VDC megger between the motor coils and casing |
|
|
Insulation voltage |
Sufficient to withstand 1.0kv,60Hz applied between the motor coils and casing for 1 minute, under normal temperature and humidity |
|
|
Temperature |
Ambient temperature |
– 10 °C ~ + 50 °C |
|
Ambient Humidity |
85% or less |
|
|
Gas medium |
No corrosive gas and dust ,can not directly contact water and oils(expect special airproof motor) |
|
|
Temperature rise |
Resistance Method is 80 oC or less (at standstill, two phase energized) |
|
| Step Accuracy | ±0.05° | |
|
Shaft Runout |
0.05mm(T.I.R) at top of output shaft |
|
|
Axial Play |
0.571mm Max.Of 1.12 1b.(5N) |
|
|
Redial Play |
0.075mm Max.Of 2.2 1b.(10N) |
|
5.Lead wire configuration
Company Introduction
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.
