Tag Archives: gear coupling sleeve

BS China in Barquisimeto Venezuela (Bolivarian Republic of) gear sleeve coupling sales 080m30 in Kanpur India seisa gear coupling near me shop 080A35 080m36 Carbon Steel Plate Strip Round Flat Pipe Wire Bar with top quality lowest price

BS China in Barquisimeto Venezuela (Bolivarian Republic of) gear sleeve coupling sales 080m30 in Kanpur India seisa gear coupling near me shop 080A35 080m36 Carbon Steel Plate Strip Round Flat Pipe Wire Bar with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Product Description

Carbon steelGRADE:BS 040A04 050A04 040A10 045A10 060A10 040A15 050A15 060A15 040A20 050A20 060A20 060A25 070m26 060a30 060a35 060a40 060a42 060a47 060a52 060a57 070m35 060a62 060a67 060a72 070A70 060A78 070A78 060A83 050A86 060A86 080A15 080A17 080A20 080A25 080A27 080A30 080M30 080A35 080M36 080A47 08M40 080A47 080M46 080A52 080M50 080A57 080A62 080A67 080A72
Carbon steel is an iron-carbon alloy with a carbon content of 0.5718% to 2.11%. Also called carbon steel. Generally contains a small amount of silicon, manganese, sulfur, phosphorus. Generally, the higher the carbon content in carbon steel, the greater the hardness and the higher the strength, but the lower the plasticity.
species
Carbon structural steel
Brand: Example Q235-A·F, which means σs=235MPa.
Brand notes: Q is the yield strength A quality grade (with ABCD grade 4), F boiling steel.
Features: low price and excellent process performance (such as weldability and cold formability).
Application: General engineering structure and general mechanical parts. For example, Q235 can produce bolts, nuts, pins, hooks and less important mechanical parts, as well as screw steel, section steel, steel bars in building structures.
High-quality carbon structural steel
Trademarks: Example 45, 65Mn, 08F.
Brand annotation: directly expresses the carbon content of the metal in tens of thousands.
Application: Non-alloy steels used to manufacture important mechanical parts are generally used after heat treatment.
Common steel grades and uses:
08F, low mass fraction of carbon, good plasticity, low strength, used for stamping parts such as automobile and instrument shell;
20, good plasticity and weldability, used for parts with low strength requirements and carburized parts, such as hoods, welded containers, small shafts, nuts, washers and carburized gears;
45, 40Mn, with good comprehensive mechanical properties after quenching and tempering, used for mechanical parts with greater stress, such as gears, connecting rods, machine tool spindles, etc.;
60, 65Mn steel has high strength; it is used to manufacture various springs, rims of locomotive wheels, and low-speed wheels.
Carbon tool steel
Brand: For example, T12 steel means carbon tool steel with Wc=1.2%.
Grade notes: T plus the metal carbon content in thousand.
Features: It belongs to eutectoid steel and hypereutectoid steel, with high strength and hardness, and good wear resistance. It is suitable for manufacturing various low-speed cutting tools.
Common steel grades and uses:
T7, T8: Manufacture parts that require a certain impact and require toughness. Such as sledgehammer, punch, chisel, woodworking tools, scissors.
T9, T10, T11: Manufacture tools with low impact and high hardness and wear resistance. Such as taps, small drills, dies, and hand saw blades.
T12, T13: Make tools that are not impacted. Such as files, scrapers, razors, measuring tools.
Cast steel
Brand: For example, ZG200-400, means cast steel with σs=200MPa and σb=400MPa.
Performance: Casting performance is worse than cast iron, but mechanical properties are better than cast iron.
Application: It is mainly used to manufacture more important mechanical parts with complex shapes and high mechanical performance requirements, and it is difficult to form by forging and other methods in the process, such as automobile gearbox shells, couplers and couplings of rolling stock.

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

BS China in Barquisimeto Venezuela (Bolivarian Republic of) gear sleeve coupling sales 080m30 in Kanpur India seisa gear coupling near me shop 080A35 080m36 Carbon Steel Plate Strip Round Flat Pipe Wire Bar with top quality lowest price

Ash China in Perm Russian Federation nylon coupling sleeve supplier Handling in Udaipur India rathi gear coupling sales Power Plant Desulfuration Pump Slurry Pump with top quality lowest price

Ash China in Perm Russian Federation nylon coupling sleeve supplier Handling in Udaipur India rathi gear coupling sales Power Plant Desulfuration Pump Slurry Pump with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Introduction: 
1. HS series slurry pump is designed for the continuous pumping of high abrasive, high density slurries with minimal maintenance requirements. The wearing parts are made of ultra chrome or and rubber. It will maintain high efficiency over the wear life of its components. 

2. The metal wet parts and rubber ones can be interchangeable for handling different liquids or slurries.

3. HS slurry pumps are available in sizes ranging from 1 inch to 18 inch discharge and feature high efficiency performance capable of flow rates from 10.8 to 5400 m³/h and heads up to 125 meters for high head models. 

Features:
1. Cylindrical structure of bearing assembly: convenient to adjust the space between impeller and front liner
and can beremoved completely;
2. Interchangeable anti-abrasive wet parts made of high-chrome alloys;
3. Casing halves of ductile iron with external reinforcing ribs provide high operating pressure capabilities
and an extra measure of safety.
4. The discharge branch can be oriented to any eight positions at the interval of 45 degrees;
5. Various drive types: DC(direct connection), V-belt drive, gear box reducer, hydraulic couplings, VFD,
SCR control, etc;
6. The shaft seal uses the packing seal, expeller seal and mechanical seal

Typical Application:

• Mineral processing • Mining • Coal Washery • Cyclone feeds
• Bentonite • Chemical slurry • Tailing • Mill grinding
• Ash handing • Tunnel • Waste sludge • Coarse sand
• Lime mud • Phosphoric acid • Dredging • Construction
• Alumina Industry • Power Plant • Potash Fertilizer Plant • Other industries
• Iron ore sand • Copper Concentration • Gold mine •Molybdenum

Model Max Power
(Kw)		 Inlet & Outlet size (inch) Material for Wear Parts Flow Rate (Q) Head
(H)
meter		 Speed
(RPM)		 Impeller Dia.
(mm)
m³/hr l/s
25HS-B 15 1.5/1 M 12.6~28.8 3.5~8 6~68 1200~3800 152
R 10.8~25.2 3~7 7~52 1400~3400 152
40HS-B 15 2/1.5 M 32.4~72 9~20 6~58 1200~3200 184
R 25.2~54 7~15 5.5~41 1000~2600 178
50HS-C 30 3/2 M 39.6~86.4 11~24 12~64 1300~2700 214
R 36~75.6 10~21 13~46 1300~2300 213
75HS-C 30 4/3 M 86.4~198 24~55 9~52 1000~2200 245
R 79.2~180 22~50 5~34.5 800~1800 245
100HS-D 60 6/4 M 162~360 40~100 12~56 800~1550 365
R 144~324 40~90 12~45 800~1350 365
150HS-E 120 8/6 M 360~828 100~230 10~61 500~1140 510
R 324~720 90~200 7~49 400~1000 510
200MS-E 120 10/8 M 666~1440 185~400 14~60 600~1100 549
200HS-ST 560 10/8 M 612~1368 170~380 11~61 400~850 686
R 540~1188 150~330 12~50 400~750 686
250HS-ST 560 12/10 M 936~1980 260~550 7~68 300~800 762
R 720~1620 200~450 7~45 300~650 762
300HS-TU 560 14/12 M 1260~2772 350~770 13~63 300~600 965
R 1152~2520 320~700 13~44 300~500 965
350HS-TU 1200 16/14 M 1368~3060 380~850 11~63 250~550 1067
450HS-TU 1200 20/18 M 2520~5400 700~1500 13~57 200~400 1370
25HHS-C 30 1.5/1 M 16.2~34.2 4.5~9.5 25~92 1400~2200 330
50HHS-D 60 3/2 M 68.4~136.8 19~38 25~87 850~1400 457
75HHS-E 120 4/3 M 126~252 35~70 12~97 600~1400 508
100HHS-E 120 6/4 M 324~720 90~200 30~118 600~1000 711
150HHS-S 560 8/6 M 468-1008 130~280 20~94 500~1000 711

For the material of wearing parts,
“M” = metal, ultra chromium alloy;         “R” = anti-abrasive rubber

Contact

Welcome to contact us any time for details.
Your inquiry will get our prompt attention and response !
 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Ash China in Perm Russian Federation nylon coupling sleeve supplier Handling in Udaipur India rathi gear coupling sales Power Plant Desulfuration Pump Slurry Pump with top quality lowest price

Compact China in Newcastle upon Tyne United Kingdom nylon coupling sleeve near me shop Single in Doha Qatar hydax gear coupling shop Shaft Wooden Plastic Crusher with top quality lowest price

Compact China in Newcastle upon Tyne United Kingdom nylon coupling sleeve near me shop Single in Doha Qatar hydax gear coupling shop Shaft Wooden Plastic Crusher with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Compact Single Shaft Wooden Plastic Crusher

Descriptions

The DGA Compact Single Shaft Shredder has a 251mm diameter profiled rotor made of solid steel, operating at a speed of 11.6~12.9rpm. The concave ground, aggressive 4-way rotating knives are mounted in the grooves of the profiled rotor with special knife holders. This enables a reduction of the cutting gap between the counter knives and the rotor which guarantees a high flow rate, low power consumption and maximum output of shredded material.

The hydraulically operated ram feeds the material automatically in the rotor’s cutting chamber by load-related controls. The hydraulic system is equipped with high-pressure valves and volumetric flow controls which can be set according to the requirements of the input material.

Extremely robust pedestal bearing housings are mounted outside the machine and separate to the cutting chamber to prevent dust and dirt penetrating into the oversized bearings. This ensures a long service life and minimum service and maintenance.

Power is transmitted from the motor by a drive belt via an oversized gearbox which is located on the shaft end on one end of the rotor.

A safety switch prevents machine startup when the front panel is open and the machine features emergency stop buttons on the machine body and control panel.

 

 Specificatoins

Layout

Features

  • Flat rotor
  • Machined pocket knife holders
  • Optional hard facing
  • Concave ground square knives
  • Robust ram construction
  • Heavy duty guide bearings
  • Universal couplings
  • Low speed, high torque geared drive
  • Powerful hydraulic horizontal ram
  • Bolt in drive shafts
  • Multiple rotor designs
  • Two speed hydraulic system
  • Oil cooling on ram and gearbox
  • Ram comb plate
  • Amp meter control

Options

  • Hydraulic screen cradle
  • Gearbox with shrink disc
  • Rotor cooling
  • Pipe spacer
  • Touch screen PLC
  • Hopper mounted viewing mirror
  • Increased motor drive
  • Hydraulic drive
  • Bespoke colour scheme
  • Gearbox with shrink disc
  • Turbo hydraulics
  • Housing wear plates
  • Sound absorbing hopper

Applitions

  • PLASTICS
  • RUBBER
  • WOOD
  • BIOMASS
  • PAPER
  • ALTERNATIVE FUELS (RDF/SRF)
  • DOMESTIC & COMMERCIAL WASTE

Factory

Since its foundation DGM Recycling Systems have been at the forefront of innovation and EPT in the development of cost effective and reliable recycling solutions. As a wholly owned subsidiary of Miracle Automation Engineering Group, a pioneer in automation systems for the automotive and material handling industries, DGM continues to strive for excellence in the field of size reduction and recycling. 

Suppliers

Certificates
All of our shredders and granulators have been approved CE certification.

Packaging & Loading

1. Several layers of plastic wrapping film and cardboard to protect plastic recycling machine from dust and moisture.

2. Plastic packing strap belt to fasten wrapping film and machines, also to fix machines in containers.

3. Wooden case is used as the outside package and spare parts when choosing by LCL, air or international express.

4. Excellant logistic team to guarantee the shredder and granulators machines to be safely shipped to customers appointed loaction.

5. If you have any other request for the packaging or loading, we will try our best to meet your demands.

FAQ

Q2: Are you a trading company or a factory ?
DGM is a factory with 10 years experience in plastic machinery manufacturing, and 20 years experience in technology.

Q2: Will you provide pre-sale services?
DGM consists of experienced specialists, we will offer a suitable solution according client’s requirement in time.

Q3: Is your after-sales service excellent?
At DGM we have a highly trained team of service personnel to handle all manner of customer service enquiries. Whether it is EPT parts, technical assistance, or just general operation advice we offer our customers genuine 24/7 support and after sale service.

We have an international network which ensures wherever you are in the world you receive localized high level support.

Our technical team has decades of experience in the field of size reduction, washing line and tire recycling and we are on hand to offer assistance in installation, commissioning, staff training and general technical assistance.
 

Q4: Where is your factory?
Address: No.1.Fengqi Road, Xihu (West Lake) Dis. District , HangZhou City, ZheJiang Province, China

Q5: What is your contact informatoin?
Fax: 0086-571-88220971: +86 510 8357 5710
Telephone: +86 510 8357 2002
Mobile/ +86 18762812155 

Q6: Could we visit your factory and test the machine?
We warmly welcome you to visit our factory anytime,and we are very glad to test our machine with your raw material.

 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Compact China in Newcastle upon Tyne United Kingdom nylon coupling sleeve near me shop Single in Doha Qatar hydax gear coupling shop Shaft Wooden Plastic Crusher with top quality lowest price

Leading China in Bur Sa’id Egypt brake drum gear coupling sales Technology in Uberlandia Brazil continuous sleeve gear coupling sales Biofuel Pellet Production Machine with top quality lowest price

Leading China in Bur Sa'id Egypt brake drum gear coupling sales Technology in Uberlandia Brazil continuous sleeve gear coupling sales Biofuel Pellet Production Machine with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Leading EPT Biofuel Pellet Production Machine

We are manufacturing and exporting poultry feed machine,fish feed machine,sheep feed machine,pig feed machine,cattle feed machine,CE machinery,feed machinery,compound fertilizer machinery,grass processing machinery,bio-energy equipments,including installation for complete engineering. 

 

Good quality wood pelletizer Pellet making machine sawdust pellet machine 

Product Description

  Smooth, steady, wide application wood pellet machine

Features Of Wood Pellet Machine

1. High precision gear-driven transmission system, about 20% higher than belt driving;

2. Siemens motor, SKF/NSK bearing, Germany oil seal to ensure long service time;

3. Advanced frequency-conversion motor, overload protection device, magnetic 

    separating device are designed to ensure safety and long service time;

4. Advanced compensation type serpentine spring coupling to ensure high efficiency, 

    low noise and long service time;

5. Gear-box body adopts HT250 material, which makes it much more durable and

    ensure its long service time;

6. Forced feeding system, specially designed for material with low density of 0.3-0.6g/m3

7. Suitable for pelleting various raw materials including woodiness, biomass waste like 

    sawdust, woodchips, straw, stalk, sugar cane, napier grass, etc.

 

Photos Of  Wood Pellet Machine

Parameters Of Wood Pellet Machine   

Model MZLH420 MZLH520 MZLH680 MZLH780
Capacity(t/h) 0.8-1.2 1.5-1.8 2-2.5 2.5-3.5
Main motor power(kw) 75/90 110/132 160/185 200/220
Feeder power(kw) 2.2 3 4 4
Ring diedia(mm) 420 520 680 780
Pellets dia(mm) 6-8 6-8 6-8 6-8

 

Raw materials for  Wood Pellet Machine

Wood Pellets is mainly made of any wood waste and biomass particles, such as wood sawdust, wood shavings, wood chips, wood logs, straw, rice husk, coffee husk etc.

 

Looking from the finished products,our wood pellet press machines are high quality, low noise

 

Wood Pellet Machine in our workshop

 

Project case of  Wood Pellet Machine

 

Packaging & Shipping

 When the container arrived our factory, our shipping operator and delivering equipments will be ready on time to ensure goods shipped based on Sales Order requirement .

 

 

Our Services

Warranty:1 years

Our professional service includes:Free training, Guidance Installation and Debugging.

Company Information

 

ZheJiang EPT International Mechanical Engineering Co., Ltd is affiliated to ZheJiang EPT Agro Machinery Co., Ltd which has about 20 years of experience in the comprehensive development and utilization in agriculture field. It covers an area of 15000 square meters, locating in the zhongguancun science& EPT industrial park in HangZhou City, ZheJiang Province, PRC.

FDSP has sold Feed machinery and fertilizer machinery throughout China and exported to Korea, South Africa, Russia, Thailand, ZheJiang , Philippines, Malaysia, Australia, Egypt, Syria, Nigeria, Ethiopia, India, Bangladesh, Pakistan, Iran etc.

 

1.A complete set of fertilizer production line with capacity of 10tph was exported to South Korea in 2008;

 

2.A complete set of pulverized coal pellet production line with capacity of 30t/h was exported to South Africa in 2009.

 

3.Three complete sets of feed production lines were exported to Egypt with capacity of 10tph, 15tph and 20tph respectively from 2571 to 2012.

 

4.A large model of pellet mill with capacity of 25tph was exported to Thailand in 2013.

 

FAQ

1. Q:Are you a factory or trading company?

A:We are a manufacturing and trading company.

 

2.Q:Where is your factory located? How can I visit there?

A:Our factory is located in HangZhou City, ZheJiang  Province, China, near ZheJiang .Our company is located in HangZhou City,ZheJiang Province,China.

 

You can fly to ZheJiang  airport directly.All our clients, from home or abroad, are warmly welcome to visit us! 

 

3.Q:How does your factory do regarding quality control?

A:”Quality is our soul. We always attach great importance to quality controlling from the beginning to the end. We have many engineers to R&D our products.

Certifications

 FDSP has obtained ISO9001:2008 international quality system certification, CE certification for feed machinery, fertilizer machinery, biomass equipment and complete sets of production line, SGS certification.

 

 

If you have any question, please contact us freely. Our after-sales service team on-line will do the best to accomplish your sincere requirement on time.

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Leading China in Bur Sa'id Egypt brake drum gear coupling sales Technology in Uberlandia Brazil continuous sleeve gear coupling sales Biofuel Pellet Production Machine with top quality lowest price

Agricultural China in Erode India gear sleeve coupling Sprockets in Kitwe Zambia bowex m24 coupling price Combine Sprockets 13t with top quality lowest price

Agricultural China in Erode India gear sleeve coupling Sprockets in Kitwe Zambia bowex m24 coupling price Combine Sprockets 13t with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

EPT Chain Group is the most professional manufacturer of power transmission in China, manufacturing roller chains, industry sprockets, motorcycle sprockets, casting sprockets, different type of couplings, pulleys, taper bushes, locking devices, gears, shafts, CNC precision parts and so on. We have passed ISO9001, ISO14001, TS16949 such quality and enviroment certification.

Agricultural Sprockets Combine Sprockets 13T
Sprocket with finished hole
Special surface treatment: Vacuum coating
Other surface treatment: Carburizing, zinc plated,

Product name  Agricultural Sprockets Combine Sprockets   13T
Materials Available 1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
Surface Treatment Annealing, natural anodization, heat treatment,  polishing, nickel plating, chrome plating, znic plating,yellow passivation, gold passivation,  satin, Black surface painted etc.
Products Available sprockt chains, pulley, shafts(axles, spline shafts, dart shafts),gears (pinions, wheels gear rack) bearing, bearing seat,  bushing, coupling, lock assembly etc.
Processing Method CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
QC : Technicians self-check in production,final-check before package by  professional Quality inspector
Size Drawings
Package Wooden Case/Container and pallet, or as per customized specifications
Certificate ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009
Advantage Quality first Service superior , Advanced equipment,Experienced workers,Perfect testing equipment
Lead Time 15-25days samples. 30-45days offcial order

 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Agricultural China in Erode India gear sleeve coupling Sprockets in Kitwe Zambia bowex m24 coupling price Combine Sprockets 13t with top quality lowest price

KCB China in Rajshahi Bangladesh hirth gear factory 2cy in Durg-Bhilainagar India nylon sleeve coupling supplier High Temperature Palm Oil Transfer Gear Oil Pump for Food Industry with top quality lowest price

KCB China in Rajshahi Bangladesh hirth gear factory 2cy in Durg-Bhilainagar India nylon sleeve coupling supplier High Temperature Palm Oil Transfer Gear Oil Pump for Food Industry with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

1.Product Description

The series KCB/2CY gear oil pumps possess the advantages of simple and compact structure, easy operation and simple maintenance. The series KCB gear oil pumps are suitbble for transporting various oils such as petroleum, diesel and lubricant oils. When using copper gears, the pumps can converfluids with low flash points such as gasoline and benzene ate temperature below 70º C.

They are widely used in oil reservoirs, piers, ships, mining sites, factories and farms. The series 2CY gear oil pumps are mainly used for transporting viscous lubricants for mechanical equipment. When equipped with stainless steel gears, the pumps c EPT cooking oils or beverages.

2.Pump Technical Parameters

1, Flow rate: 18.3~2500 l/min

2, Suction distance: 5 m

3, Outlet diameter: 3/4″- 8 “

4, Outlet pressure: 0.28 – 1.45 MPA

5, Motor power: 1.5 KW-75 KW

3.Models Specifications for Clients Choosing(More Information Pls Contact Us)

 

Model Size Flow (L/min) Pressure (Mpa) Power (Kw) Speed (rpm)
KCB18.3 3/4″ 18.3 1.45 1.5 1400
KCB33.3 3/4″ 33.3 1.45 2.2 1420
KCB55 1″ 55 0.33 1.5 1400
KCB83.3 1 1/2″ 83.3 0.33 2.2 1420
KCB83.3 1 1/2″ 83.3 0.5 3 1450
KCB200 2″ 200 0.33 4 1450
KCB200 2″ 200 0.6 5.5 1450
KCB200 2″ 200 1.0 7.5 1450
KCB300 3″ 300 0.36 5.5 1450
KCB483.3 3″ 483.3 0.36 7.5 1450
KCB483.3 3″ 483.3 0.6 11 1450
KCB633 4″ 633 0.28 11 970
KCB960 4″ 960 0.28 18.5 1470
KCB1200 6″ 1200 0.6 37 740
KCB1600 6″ 1600 0.6 45 980
KCB1800 8″ 1800 0.6 55 740
KCB2500 8″ 2500 0.6 75 980

4.Pump Structures

5.Spare Parts Show

6.Product Advantages

1.Driving Gear Passive Gear
The active / passive gear after high temperature quenching, ion carburizing lime chloride. Gear has a stronger hardness, wear resistance, high temperature resistance, etc.. Can extend the service life of the gear.

2.High Temperature Bearing
High temperature bearings can bear larger load torque, under high temperature, good stability, high bearing capacity, withstand high temperatures. Wear small, long life. DEFU gear KCB18.3-KCB83.3 is the sliding bearing, KCB200 above is the rolling bearing.

3.Mechanical Seal
Carbide mechanical seal, with good heat resistance and impact resistance, friction coefficient is small, self lubricating performance, reliable performance, no leakage, high temperature resistance, wear resistance, corrosion resistance.

4.Integral Coupling
DEFU high temperature gear pump uses the integral coupling, safe and reliable, the concentricity is good, the service life is long, under the heavy load operation bears the torque ability to be strong.

5.100% Copper Motor
DEFU gear pump matching 100% copper motor, stable operation, low calorific value, output power standards, long service life.

6.Certificate of Inspection
DEFU out of the factory every gear pump has been strictly tested, and equipped with a certificate, manual, test data report, the ship with the Chinese classification society CCS certificate.

7.Product Details(Warmly Welcome To Contact Us)

8.Applications

KCB type gear pump is suitable for transporting heavy oil, mechanical oil, fuel oil and solid material, fiber, oil, chemical products, etc.. The pump is equipped with a safety valve to prevent damage to the pump and motor caused by overload.

9.Our Factory

Welcome to visit our factory!
All My Striving,For Your Satisfaction.
*********************************************************************************************
Head Office: HangZhou DEFU Machinery Co.,Ltd
Subsidiary Factory Name:ZheJiang Y&L Pump Co.,Ltd
Mobile :+86 -1857130095    Fax: 0086-571-88220971: +86~571-8822571/88220973-86553150

WebSite:

 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

KCB China in Rajshahi Bangladesh hirth gear factory 2cy in Durg-Bhilainagar India nylon sleeve coupling supplier High Temperature Palm Oil Transfer Gear Oil Pump for Food Industry with top quality lowest price

Custom China in Sorocaba Brazil nylon coupling sleeve factory Large in Taoyuan China, Taiwan Province of China esco gear coupling near me Size Forging Casting Steel 42CrMo Large Module Transmission Spur Gear with top quality lowest price

Custom China in Sorocaba Brazil nylon coupling sleeve factory Large in Taoyuan China, Taiwan Province of China esco gear coupling near me Size Forging Casting Steel 42CrMo Large Module Transmission Spur Gear with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Product specification
1.Material:C 45# steel ,stainless steel or other required materials.

2.Gears can be made according the customer’s drawings

3.Heat treatment: Hardening and Tempering, High Frequency Quenching, Carburizing Quenching and so on according the requirements..

4. Inspection: All items are checked and tested thoroughly during every working procedure and after production will be reinspected.

About us
HangZhou Jumai Sprocket Co., Ltd. is a professional manufacturer of various sprocket wheels, stainless steel sprocket wheels, non-standard sprocket wheels, large pitch sprocket wheels, coupling sprocket wheels, spur gears, timing belt wheels, gear racks, umbrella Gear, worm gear, shaft, sleeve and other transmission parts manufacturers. And according to customer drawings, samples, size processing custom production. The company integrates design R & D, manufacturing and sales. In accordance with strict production, inspection and quality standards, the company has established a comprehensive quality system, production process and perfect quality control. The company’s sprocket products are of high quality, stability and durability.

The company now has 80 sets of various high-precision CNC lathes, gear hobbing machines, gear shapers, tempering furnaces, quenching equipment, gantry planers, universal milling, sawing machines, vertical broaching machines, hydraulic machines and other processing equipment, with an annual production capacity of 2 million pieces . Carburizing and quenching, nitriding, quenching and other heat treatment, surface blackening, galvanizing, electrophoresis, etc. At the same time, it also has high-precision testing equipment such as: Rockwell hardness tester, Vickers hardness tester, metallographic microscope, image measuring instrument, Magnetic particle flaw detectors, etc. The products produced are widely used in metallurgy, steel, chemical, textile, agricultural machinery, three-dimensional garages, packaging machinery, chemical machinery, pharmaceutical machinery, industrial and mining machinery and other industries. The product indicators meet the requirements of importing similar products and are exported to Hong Kong and ZheJiang , Southeast Asia, Europe, America, the Middle East and other regions, and are deeply trusted and praised by customers.

FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.

Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?
A: Payment 30%TT in advance. 70% T/T before shippment.

Q:What`s the MOQ of your products?
A:1 set,we can also deal with the sample order. and the large-quantity.

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Custom China in Sorocaba Brazil nylon coupling sleeve factory Large in Taoyuan China, Taiwan Province of China esco gear coupling near me Size Forging Casting Steel 42CrMo Large Module Transmission Spur Gear with top quality lowest price

China China in Kiev Ukraine falk 1020g20 near me shop Foundry in Kaduna Nigeria nylon coupling sleeve supplier Supplier Resin Sand Casting Worm Gear with top quality lowest price

China China in Kiev Ukraine falk 1020g20 near me shop Foundry in Kaduna Nigeria nylon coupling sleeve supplier Supplier Resin Sand Casting Worm Gear with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

COMPANY INTRODUCTION

EPT Co., Ltd. founded in 2001 , Company is located in the Chinese ancient city — HangZhou. Our company has been engaged in producing EPT engineering accessories, OEM/ODM spare parts and industrial components for many years, including sand casting parts and investment casting spare parts, forging parts, sheet metal stamping spare parts, machined parts and plastic parts, which are widely used in petrochemical, automobile, chemical, EPT protection , machinery, construction, agriculture, aerospace, marine EPT and other industries.
 

 

GRAY IRON/DUCTILE IRON/CARBON STEEL/ALLOY STEEL SAND CASTING
 

Sand casting accessories and cnc machining part for engine, refrigerator and air conditioner, fan, compressor, pump, flange, washer, coupling, gearbox case, shaft, valve and strainer, tractor, automotive, motor rotor, electronic case, computer,  water treatment equipment. Weight of products range from 0.5kgs to 10tons. The usually used materials are ductile iron, gray iron, high chrome iron, many kinds of steel, brass, copper, aluminum and wear resistant material, etc.
Process: sand casting+cnc machining+deburrs
Tolerance: +/-0.05mm
Surface: deburrs,degrease,chamfer
Service available: OEM & ODM
Quality control: 0 defects,100% inspection before packing
Delivery time: 30 days after confirm the drawing
Packing:   Inner:bubble poly bag; Outer:5 layers ctn box or poly wooden box/pallet
Logistics service:  sea,air,express,EXW,FOB,CIF,DDU,DDP

Warranty:   100% refund or replacement for NOK pcs

Our Services

1, R&D service                       2, Drawing design service
3, Samples service                  4, Bulk production service
5, Inspection service               6, Packing&shipping service

Packaging & Shipping

1.Packing: 
Inside:bubble bag
Outside:carton case or poly wooden case
2.Shipping: 
Small batch by courier, large batch by sea or air

Certifications

1. ISO9001-2008
2. SGS
3. Material Certificate
4. CIQ…

Company Capabilities:

(1).CNC machining parts
(2).The fabrication
(3).The mechanical assemble
(4).The Surface treatment

Plating :3+Cr,environmental,anti-corrosion maximum 480 hours salt spray test
Coating:powder coating,electrcial coating,maximum 480 hours salt spray test
Painting:environmental EXPOSY painting,cross-cutting test
Polish:satin polish,mirror polish,electrical polish, maximum 1200 grid
Dacromet:evironmental,anti-corrosion,maximum 560 hours salt spary test
Anodization:tumble,shot blast,sand blast…..,various color,maximum 480 hours salt spray test
Nylok:tight-locking,environmental,5 million times
Heat Treatment:adjust the mechanical properties,temper,normalization,quench……
(5).The Variousl Material
stainless steel:SS304,SS304L,SS316,SS316L,SS430,SS201……
aluminium:7075,6061,6063,5082,5051,2014…….
brass:H62,H58,H59……
steel:C20,C45,C60,C35……
steel alloy:25CrMo,42CrMo,25Cr,40Cr,Q345,11SMn30……
iron cast:QT600,QT250,HT450,HT150……
titanium alloy:GR2,GR5,GR7,GR9……
tungsten alloy:WuNiFe alloy,Carbide Wolfram……
the blanks:stamping parts,forging parts,die casting parts,profile,extrusion……

the plastic:PP,PE,POM,Acrylic,ABS,Delrin……

 

 

COMPANY EQUIPMENTS

THE PACKAGE AND SHIPMENT

CUSTOMERS

 

 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

China China in Kiev Ukraine falk 1020g20 near me shop Foundry in Kaduna Nigeria nylon coupling sleeve supplier Supplier Resin Sand Casting Worm Gear with top quality lowest price

Best China in Hannover Germany maina coupling manufacturer Micro in Karaj Iran (Islamic Republic of) gear sleeve coupling supplier Mini Actuators, Mini Screw Actuator Drive, Micro Miniature Linear Actuator Manufacturer with top quality lowest price

Best China in Hannover Germany maina coupling manufacturer Micro in Karaj Iran (Islamic Republic of) gear sleeve coupling supplier Mini Actuators, Mini Screw Actuator Drive, Micro Miniature Linear Actuator Manufacturer with top quality lowest price

We – EPG Team the greatest couplings and gears factory in China with 5 diverse branches. For far more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828 /

We are the very best micro mini actuators, mini screw actuator push, micro miniature linear actuator manufacturer and provider in China. Go to https:// /merchandise/500-lbs-capability-worm-gear-mini-machine-screw-jack.html to learn much more about micro mini actuators, mini screw actuator travel, micro miniature linear actuator.

Features
one. Upright or inverted installation with maximum static load potential 2.five kN (250 kg)
two. Self-locking equipment screw with no need brake or lock mechanisms to hold position. 
three. Machine screw diameter 14mm, pitch 4mm (solitary start acme thread).
4. Offered in five:1 and twenty:one ratios.
five. Customize vacation length, max. 1500mm with rigidity load. 
6. Translating screw (travelling screw jack), keyed screw for anti-rotation (keyed screw jack), and rotating screw (travelling nut screw jack) as the regular configurations.
7. Mini handbook screw jack with 125mm diameter handwheel. Selection mini EPT screw jack with modest motor, but can not immediately coupled with motor flange, ONLY connection by coupling for foot mounted.
eight. Individually mini screw jack use, or mini screw jack lift system, connected by couplings, connecting shafts, mini bevel gearboxes with one:1 ratio.

Structures and Supplies
one. Lifting screw substance – C45 steel
2. Worm (enter shaft) content – C45 metal
3. Worm gear substance – bronze
4. Housing (gearbox) material – ductile iron, or aluminum
five. Traveling nut – bronze  

Specifications
The mini screw jack requirements consist of optimum load potential, worm screw diameter and pitch, worm equipment ratio, allowable highest input electrical power, torque and speed and all round effectiveness and so on. 

one. Circumstances: 20% running time/60 minutes or thirty% working time/ten minutes, twenty °C ambient temperature. Optimum allowable input electrical power .18kw, when your variety is EPT the highest enter electrical power, the operational restrictions thanks to thermal boundaries. you will need to have to pick the even bigger dimension screw jacks in order to let powerful warmth dissipation. 
two. H=higher ratio five:one (.8mm stroke for 1 enter turn), L=slow ratio 20:1 (.2mm stroke for one particular input turn).
3. Nm=input torque necessary, kW=input electrical power necessary. 
four. Selection of mini screw jack using earlier mentioned figures need to only be carried out in consultation with Jacton engineers.

Assembly Drawings
Find out mini screw jack entrance view, side view and top see assembly drawings. About 2d Autocad dwg, dxf assembly drawings, and 3D stp, stage, model, igs, prt or catpart assembly drawings, please contact us directly.

Cargo and Packing Pictures 
Delivery:
1. EPT freight: seaport to seaport, price conditions CIF, FOB, EXW, CFR etc.
2. Air freight: airport to airport, price tag conditions EXW, CRF and many others.
3. Air courier: DHL, FEDEX, UPS, TNT doorway to doorway shipment, value phrases DDU, CPT and so forth.
Packing: 
a hundred% standard exporting plywood cases. 
Notice: Worldwide Exporting Normal Picket Materials with Cost-free Fumigation.

JACTON Positive aspects
one. Intercontinental common materials for All JACTON model items. We insist on choosing brand suppliers to source the high high quality raw components to management the making process. Optimization continuously the generation processes, inspecting in each and every website link and managing generation internet site.
two. one hundred% high quality confident with double quality inspections. The good quality inspection by quality inspectors from processing to concluded goods as the first time. Just before packing, the corresponding income engineers have to inspect the orders subsequent the paper drawings, purchase quantities and particular markings in the bill or sales contracts as the 2nd time. After that, fill in the inspection report with signature and firm stamp.
3. one hundred% safety transportation. Packing with EPT common export plywood cases materials (cost-free fumigation), internal packing with epe foams to avert goods swaying and outer packing with iron sheets and fasteners to fasten the deals.
4. Internationl income engineers have skilled expertise and expertise on our standard goods and provider. They have adequate potential to resolve the fundamental technological difficulty instantly no matter what by phone, on-line chat, experience to confront communications.
5. All the regular products with 2d CAD Drawings (PDF, DWG and DXF formats), and 3D CAD Types (Phase, STP, Model, IGS, PRT and CATParT formats).
six. Personalized design and style accessible, OEM support accessible, Free engineering suggestions, Cost-free rates offered and Client label accessible.
7. Inspection equipments include motor with inverter generate system, top adjustmemt motorized lifting method, coordinate measuring machines, outside the house micrometers, inside of micrometers, depth calipers, vernier calipers, electronic calipers, hardness testers, electronic sound meters, industrial infrared thermometers, digital speed measuring devices, electronic multimeters, and higher precision clamp electronic ammeter and many others. 
8. Processing with contemporary sophisticated equipment this sort of as CNC equipment hobbing equipment, CNC flank grinding equipment, CNC cylindrical grinding machines, multi-axis CNC milling machines, CNC lathes and other folks equipments.

Completed Projects
1. Theatrical options phase and orchestra system lifts initiatives. Buyers are from France, Australia, Netherlands, United Kingdom, Spain and Canada. 
2. Hydro EPT energy station initiatives and drinking water conservancy assignments. Consumers are from Vietnam, Australia, Malaysia, Russian Federation, Nepal, Pakistan, Belgium, United States and United Kingdom. 
three. Aircraft routine maintenance platforms and docking systems initiatives. Consumers are from Pakistan, Singapore and United Arab Emirates.  
four. Photo voltaic panel tracking program initiatives. Clients are from Spain, India and Canada. 
5. Bolted steel storage tanks and silos lifting solutions. Buyers are from South Africa, United States, Mexico, Russian Federation, Brazil and Vietnam. 
six. Dish antenna elevation and azimuth positioning initiatives. Buyers are from Singapore, Malaysia and United States. 
7. Railway wagon tasks. Buyers are from South Africa. 
8. Beverage can production lines. Customers are from Netherlands, United States, Thailand and Indonesia. 
9. Metal factories production strains. Clients are from Iran, United States and Turkey. 
ten. Continuous PU sandwich panel creation traces. Consumers are from Thailand and United Kingdom.  

JACTON Buyers Areas(Nations around the world)
1. American International locations: United States, Mexico, Canada, Chile, Xihu (West Lake) Dis.through, Brazil, Colombia, Dominican Republic, Honduras, Costa Rica, Panama, Puerto Rico, Jamaica, Trinidad and Tobago, Aruba, Argentina, Peru, Venezuela.
2. European Nations: Russia, Germany, Turkey, France, United Kingdom, Italy, Spain, Ukraine, Poland, Romania, Netherlands, Belgium, Greece, Czech Republic, Portugal, Sweden, Hungary, Belarus, Austria, Switzerland, Bulgaria, Denmark, Finland, Slovakia, Norway, Ireland, Croatia, Ga, Armenia, Lithuania, Slovenia, Estonia, Cyprus, Luxembourg, Iceland.
three. Asian Nations around the world: Malaysia, Indonesia, Singapore, Pakistan, Philippines, Vietnam, United Arab Emirates, Thailand, Saudi Arabia, Iran, Turkey, India, Nepal, Yemen, ZheJiang , Sri Lanka, Israel, Jordan, Kuwait, Qatar.
four. Oceanian Countries: Australia, New Zealand, Fiji.
five. African Nations: South Africa, Egypt, Ethiopia, Nigeria, Kenya, Tanzania. 

JACTON Merchandise Record
one. Handbook Screw Jacks, EPT Screw Jacks.
2. Screw Jacks Sequence: JT collection acme screw jacks, JTC sequence cubic screw jacks, JTW sequence equipment screw jacks, JTM collection worm screw jacks, JTB series ball screw jacks, JTD collection cubic ball screw jacks, JSS collection stainless steel screw jacks, JTS series bevel gear screw jacks, Non-common collection screw jacks. 
3. Bevel Gearboxes Collection: JT collection bevel gearboxes, JTP series cubic bevel gearboxes, JTA sequence aluminum bevel gearboxes, JTH collection hollow shaft bevel gearboxes, BSS collection stainless steel bevel gearboxes.  
4. Lifting Programs and Methods Components: two-jacks techniques, three-jacks methods, 4-jacks methods, six-jacks systems, 8-jacks systems. Components cover couplings, universal joints, cardan shafts, connecting shafts, EPT motors, geared motors and reducers, hand wheel with crank handles, pillow block bearings, flange block bearings, rod finish bearings, quit nuts, restrict switches, safety nut, journey nuts, linear shafts and bearings, linear guides and bearings, telescopic spring addresses, bellows boot, protecting tube, trunnion adapter plates, trunnion mounting brackets, motor flanges, rotary encoders, potentiometers, frequency inverters and place indicators and many others.
five.  EPT Linear Actuators Sequence: Parallel heavy responsibility linear actuators, In-line weighty obligation linear actuators.
6. Geared Motors and Pace Reducers Series: helical gearmotors R series, helical bevel gearmotors K series, parallel shaft helical gearmotors F series, helical worm gearmotors S series, modest AC equipment motor collection and worm gear motor reducer sequence.

Make contact with Data
JACTON Business Co.,Ltd (VAT No.: 9144190007026567X3, registered Cash 500000CNY) is a leading manufacturer and supplier of  Screw Jacks (Mechanical Actuators), Bevel Gearboxes, Lifting Methods, EPT Linear Actuators, Gearmotors and Velocity Reducers, and Other folks Linear Movement and Electricity Transmission Merchandise in China.  We are Alibaba, Produced-In-China and SGS (Serial NO.: QIP-ASI192186) audited company and supplier. We also have a strict top quality program, with senior engineers, experienced expert staff and practiced income teams, we constantly offer the substantial good quality equipments to satisfy the buyers electro-mechanical actuation, lifting and positioning demands. JACTON Market assures high quality, reliability, efficiency and value for present day demanding industrial programs.
Internet site (English): 
Website (English): 
Website (Chinese):  /wp-content/uploads/2019/10/QzpcVXNlcnNcQWRtaW5pc3RyYXRvclxBcHBEYXRhXFJvYW1pbmdcRGluZ1RhbGtcMjQxNTc4Nzk5X3YyXEltYWdlRmlsZXNcMTA4MTAzMjdcMTg1NjAzMDcxMl85MjY3ODM0NTc3X2VwLWNvbnRhY3RzLmpwZw.jpg” alt=”Ideal China in Hannover Germany maina coupling company Micro in Karaj Iran (Islamic Republic of) gear sleeve coupling supplier Mini Actuators, Mini Screw Actuator Travel, Micro Miniature Linear Actuator Company with prime quality lowest value” >

DIN China in Rajshahi Bangladesh zapex coupling near me shop Standard in Hanoi Viet Nam nylon sleeve gear coupling near me Bevel Gear with Spline Mod1.5, 15t with top quality lowest price

DIN China in Rajshahi Bangladesh zapex coupling near me shop Standard in Hanoi Viet Nam nylon sleeve gear coupling near me Bevel Gear with Spline Mod1.5, 15t with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with five different branches. For far more information: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828 /

EPT Chain Team is the most specialist company of power transmission in China, manufacturing roller chains, business sprockets, motorcycle sprockets, casting sprockets, different kind of couplings, pulleys, taper bushes, locking units, gears, shafts, CNC precision areas and so on. We have handed ISO9001, ISO14001, TS16949 these kinds of good quality and enviroment certification.

Merchandise DESCRIPITION:
Common bevel equipment with spline
Equipment with straight enamel
Mould from .5–16
MaterialLcast iron, 20CrMnTi, 20Cr, 40Cr
Carburization
High top quality lubrication.
20 degree stress angle
Sort: B(with a single hub)

Product name  DIN Common Bevel Equipment with Spline Mod1.five,15T
Materials Available 1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
four. Bronze: C51000, C52100, C54400, etc
five. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
seven.OEM according to your request
Surface Treatment method Annealing, natural anodization, heat treatment,  polishing, nickel plating, chrome plating, znic plating,yellow passivation, gold passivation,  satin, Black surface painted and so on.
Products Available sprockt chains, pulley, shafts(axles, spline shafts, dart shafts),gears (pinions, wheels gear rack) bearing, bearing seat,  bushing, coupling, lock assembly and many others.
Processing Method CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
QC : Technicians self-check in production,closing-check out ahead of package by  specialist Good quality inspector
Size Drawings
Deal Picket Situation/Container and pallet, or as per customized specifications
Certificate ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009
Gain Quality very first Support exceptional , Advanced tools,Skilled personnel,Perfect screening products
Lead Time 15-25days samples. 30-45days offcial order

/ The use of unique tools manufacturer’s (OEM) component figures or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our firm and the outlined EPT parts contained herein are not sponsored, accepted, or created by the OEM. /

DIN China in Rajshahi Bangladesh zapex coupling near me shop Standard in Hanoi Viet Nam nylon sleeve gear coupling near me Bevel Gear with Spline Mod1.5, 15t with top quality lowest price