news

• Installation of stainless steel coupling diaphragm diaphragm material

  In order to prevent the fretting of the diaphragm during high-speed operation, resulting in microcracks and damage to the bolt holes of the diaphragm, a solid lubricant such as molybdenum disulfide can be applied between the diaphragms or the surface of the diaphragm can be treated with a wear-reducing coating ；

• Correct installation bolt method of diaphragm coupling

  The bolt is one of the important parts of the diaphragm coupling. Whether it is installed correctly or not directly affects the performance life and performance of the diaphragm coupling, otherwise it will cause a waste of manpower and accessories.Therefore, the correct installation of the bolt direction is a key part, and you must remember not to install it backwards or drop any small parts including spring washers, so that the bolt assembly can exert its excellent performance and will not damage other parts of the coupling...

• Coupling compensation type of diaphragm

  The misalignment forms that the diaphragm coupling can compensate include the following three basic types: angular (the center lines of the two shafts intersect at the midpoint between the ends of the two shafts at an angle), transverse (the center lines of the two shafts are offset in parallel) and Axial (the axial gap between the two shafts is too large).