Ever-Power Co., Ltd.
Email: [email protected]
news
What problems are prone to occur when the coupling is installed
1. The axis of the coupling is skewed, and the coupling can't advance: To prevent such incidents, in addition to correcting the axis, the orientation of the coupling hole and the shaft, and the orientation of the hitting block, you must also be careful. , The direction of the hitting point must be selected, and the second hit must be light. After entering a certain distance (about 1/3), the force can be slammed.
2. When precision parts such as bearings and mechanical seals have been installed on the main shaft beforehand, stop strong impact and impact on the coupling to prevent damage or damage to the precision parts.
3. Other common problems: Retreat due to the improper orientation of the bumper pulley, sliding down of the hoist chain, lack of fuel, fire, etc., all should be paid attention to in advance and carefully checked during the preparation and operation of the equipment.
Recommended
- What to check for damage to the coupling 2019-12-09