Consisting of the strain balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this electrical power unit is created to operate materials handling tools. The decreasing movement is achived by the solenoid valve with all the lowering pace managed by an adjustable needle valve. The left and correct functions are outfitted using a dual pilot operated examine valve and cross-over relief valves.
Remark: Please talk to our product sales engineer to the diverse pump displacement, motor electrical power or tank capability.
one. This power unit is of S3 duty cycle, i.e.,non-continuous operation,30 seconds on and 270 seconds off.
2. Clean each of the hydraulic elements concerned ahead of installation of the power unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which must also be clean and free of impurities.N46 hydraulic oil is advised.
four. This power unit needs to be mounted horizontal.
5. Check the oil level from the tank just after the 1st get started of the electrical power unit.
six. Oil shifting is required soon after the first a hundred operation hrs, afterwards the moment just about every 3000 hours.
SNOW PLOW Electrical power UNIT